Network; Wan Config - ATCOM AT530 User Manual

AT530 User Manual
Phone Number public sip and private sip phone numbers.
2.3

Network

2.3.1

Wan Config

WAN port network setting page.
Support static IP, dynamic obtain IP and PPPoE.
Configure Static IP:
----Enable Static;
----Set AT530's IP address in the IP Address;
----Set netmask in the Netmask field;
----Set router IP address in the Gateway;
----DNS Domain:
----Set local DNS server in the Preferred DNS and the Alternate DNS
Configure to dynamic obtain IP
----Enable DHCP;
If there is DHCP server in your local network, AT530 will automatically obtain WAN port
network information from your DHCP server.
Configure PPPoE:
----Enable PPPoE
----PPPoE server: Enter "ANY" if no specified from your ITSP.
----Enter PPPoE username and pin in the username and password.
AT530 will automatically obtain WAN port network information from your ITSP if PPPoE
setting and the setup are correct.
8/47