How To Use The Record Function - ATCOM AT530 User Manual

AT530 User Manual
answer the caller during the No Answer Time, the call will be forward to the destination number.
----Forward Always: Select Always in the Call Forward Field, and Key in the destination phone
number in the Forward Number, then any one call this gateway will be forward to the destination
number.
Call Transfer:
Check the Enable Call Transfer.
Unattended transfer:
If A is the AT530 user, and B calls and talking with A through VoIP. A can press FWD button to hold
the call with B, and then enter C's number. B will be transferred to C and can talk with C.
Attended transfer:
Only SIP protocol support this function .If A is the AT530 user, and B calls and talking with A
through VoIP. A can press Hold button to hold the call with B, and then enter C's number to talk
will C. and press Hold to switch back to A, and then press FWD key , B will be transferred to C and
can talk with C.
3-Way Conference Calls
Check Enable Three Way Call
Assume A is the AT530 user, and B calls and talking with A through VoIP. A can press hold button to
hold the call with B, then enter C's number to talk with C, and then press * button again to make
3-way conference calls.

9.1.7 How to use the record function?

AT530 provides record function. With this function, user may record three VoIP message and one local
message.
Active answering machine:
Select "Enable Voice Record" to active answering machine, and config No Answer Time. If there is
an incoming call and no one answer the call. After timeout, AT530 will auto answer this call and ask
the caller to leave message.
Incoming Record Playing: play the message when recording.
User-Defined Voice: Use customizes greeting voice for answering machine.
43/47