Table of Contents
Advertisement
Image 8-33
Blanking
A
Top blanking
B
Bottom blanking
C
Left blanking
D
Right blanking
Adjusting the blanking
1. Press MENU to activate the menu bar.
2. Press → to select the Image item. (image 8-34)
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select Blanking.
5. Press ENTER to confirm.
The Blanking pop-up menu appears. (image 8-35)
6. Use ← or → to select Enabled or Disabled.
Enabled
Blanking adjustment is possible
Disabled
Blanking adjustment is not possible
7. Use the ↑ or ↓ keys to select Top, Bottom, Left or Right blanking and change the value with ← or → until the desired blanking is
obtained.
Or,
use the ↑ or ↓ keys to select Top, Bottom, Left or Right blanking and press ENTER to change the value indication to a input field
and enter a new value with the keyboard. Press ENTER to accept this value. (image 8-36)
R5976817 RLM H5 02/06/2006
8. Image Menu
81
Advertisement
Table of Contents
