Clear Space; Decorative Doors, Fronts And Surrounds; Fixed Glass Assembly; Remote Controls, Thermostats And Wall Switches - Quadra-Fire COLBAY-INS Owner's Manual

C. Clear Space
WARNING! DO NOT place combustible objects in front
of the fi replace or block louvers. High temperatures may
start a fi re. See Figure 2.2.
Avoid placing candles and other heat-sensitive objects on
mantel or hearth. Heat may damage these objects.

CLEAR SPACE

3 FT. IN FRONT OF FIREPLACE
Figure 2.2 Clear Space
D. Decorative Doors, Fronts and Surrounds
WARNING! Risk of Fire! Install ONLY doors, fronts or
surrounds approved by Hearth & Home Technologies.
Unapproved doors or fronts may cause appliance to over-
heat.
For more information refer to the instructions supplied with
your decorative door or front.
8
APPLIANCE INSTALLED IN EXISTING
SOLID FUEL FIREPLACE
Quadra-Fire • COLBAY-INS • 7002-109 Rev. P • 8/11
E. Fixed Glass Assembly
See Section 12.L.
F. Remote Controls, Thermostats and Wall
Switches
Follow the instructions supplied with the control installed
to operate your fi replace:
For safety:
• Install a switch lock or a wall/remote control with child
protection lockout feature.
• Keep remote controls out of reach of children.
See your dealer if you have questions.
G. Before Lighting Fireplace
Before operating this fi replace for the fi rst time, have a
qualifi ed technician:
• Verify all shipping materials have been removed from
inside and/or underneath the fi rebox.
• Review proper placement of logs, ember material and/or
other decorative materials.
• Check the wiring.
• Check the air shutter adjustment.
• Ensure that there are no gas leaks.
• Ensure that the glass is sealed and in the proper position.
WARNING! Risk of Fire/Asphyxiation! DO NOT oper-
ate fi replace with fi xed glass assembly removed.
IGNITER BUTTON
Figure 2.3 Igniter Button