Installation; Network + System Requirements ...................... E Rror ! Bookmark Not Defined - Encore ENHWI-3GN3 User Manual

Item
Reset
WPS Button Push-n-Connect
DC 12V
LAN1 and LAN2
USB Port
WAN

2. Installation

2.1- NETWORK PLUS SYSTEM REQUIREMENTS
To begin using the ENHWI-3GN3, make sure you meet the following as minimum requirements:
PC / Notebook Computer as client
Operating System – Microsoft™ Windows
Windows
Computer with 1 working RJ-45 Network Interface Card port
Wi-Fi adapter card – (optional for Wireless LAN installation procedure)
Internet connection (Subscription to your local ISP may be required)
o External xDSL (ADSL) or Cable modem internet subscription with an Ethernet
o
A Web Browser running Internet Explorer, Safari, Firefox, Opera etc.
Ethernet compatible CAT5 or better cables.
®
7
WAN port (RJ-45) or
3G USB Modem for Internet Connection
ENHWI-3GN3 User's Manual
Press and release this button to reboot the device. Press
and hold this button for 10 seconds to load the factory
default settings of the system.
Press this button to start Push-n-Connect (WPS)
function.
Power connector, connects to a DC 12V 1A Power
Adapter (Supplied)
Ports 1 and 2 Local Area Network (LAN) 10/100 Mbps
RJ-45 ports
Used for 3G USB Modem (Not included) from your 3G
ISP subscription
Wide Area Network (WAN) port or
Internet Port. Connects to xDSL or Cable Modem
®
98SE/ME/XP/2000/ Windows Vista™ /
www.encore-usa.com
Description
7