Smart Wizard - Encore ENHWI-3GN3 User Manual

3. Smart Wizard

Connects your computer to the ENHWI-3GN3 router and set up basic settings the easy
way
Before you start the ENHWI-3GN3 router's Smart Wizard, check for the
followings:
It is recommended using the Ethernet cable connection when running the Smart Wizard
for accuracy purposes.
•
Internet connection should be running & ready for internet use (3G internet
connection, ADSL or Cable modem).
• ADSL Modem or Cable Modem must have an RJ-45 LAN port, DSL or Cable
modem usually are supplied by your ISP or Internet Service Provider
• Microsoft Windows compatible PC/Notebook with UPnP enabled Network Interface
Card adapter. (This can be found in your network cards advanced properties within
MS Windows) Optional, this is if you prefer to use the UPnP feature.
•
CAT 5 or better network Ethernet cable(s) with RJ-45 connector for PC/Notebook
connections. (** RJ-45 looks like a telephone cable connector but bigger)
Step 1:
• For DSL or Cable Broadband. Connect the ENHWI-3GN3 "WAN Port" & your
Cable or DSL Modem's LAN port using the provided Blue Ethernet / RJ-45 patch
cable.
• For 3G Internet. Connect the 3G USB Modem to the USB Port. (Note: It may
take around 20 seconds for the router to recognize and initialize the 3G USB
Modem.
Step 2: Connect any of the two available LAN ports to your PC or Notebook's RJ-45
network interface card port using the provided Yellow Ethernet cable.
Step 3: Power-on the ENHWI-3GN3 unit. The red power LED in the front the panel
should light up & stay on to indicate that the router is ready.
Step 4: Bring up the Smart Wizard. The "Smart Wizard" is a user friendly step-by-step
instruction to help you to initially set up your router to connect your computer(s) to the
internet; it also guides you in setting up the administrator's user ID and password, set up
the ENHWI-3GN3 wireless security to protect your router and your LAN computers from
hackers and other type of intrusions. Write down user ID and password, in case you
forgot a hardware reset button can bring the settings back to the manufacturers default
ID's and the changes you made to the settings will be erased.
ENHWI-3GN3 User's Manual
www.encore-usa.com
12