Table of Contents
Advertisement
n Group monitoring (Fig. 13)
Utilize the group monitor function in each of the fol-
lowing cases:
1. Check the malfunction code.
(See the next page.)
2. Check the group that requires cleaning of the air
filter and air cleaner element. (See page 21.)
3. Change the setting of the master remote control-
ler. (See page 20.)
4. Check the group(s) sharing the same outdoor
unit. Or, check the particular group(s) with the
master remote controller setting. (See page 20.)
5. Check the conditions of other individual groups.
When in zone screen
The zone screen will revert to the individual screen
automatically if nothing is done in it for one minute.
[Registration]
1.
Press the "ALL/INDIVIDUAL" button
to switch to the
2.
Using the arrow key,
to select the unit to be monitored.
"
"
Keeping the button pressed down will move it
rapidly.
The "
" lights up and the status of that unit
is displayed in the LCD. The cursor in the screen
Fig. 13 has selected unit 2-06.
Operation
Maintenance
lamp
display
17
"INDIVIDUAL" screen.
move the
Malfunction
Unit No.
code
64
65
68
6A
6A
6F
6H
94
A0
A1
A1
A3
A6
A7
n Error diagnosing function
(Fig. 14)
This central remote controller is provided with a diag-
nosing function, for when an indoor unit stops due to
malfunction. In case of actuation of a safety device,
disconnection in transmission wiring for control or fail-
ure of some parts, the operation lamp, inspection dis-
play and unit No. start to flash; then, the malfunction
code is displayed. Check the contents of the display,
and contact your DAIKIN dealer because the above
signs can give you the idea on the trouble area.
[Registration]
1.
Press the ARROW KEY BUTTON to
call up the group that has stopped due to
malfunction.
The unit No.
flashing because of an error failure.
Error content
Indoor air thermistor error
Outdoor air thermistor error
HVU error (Ventiair dust-collecting unit)
Dumper system error
Dumper system error + Thermistor error
Simple remote controller error
Door switch (Ventiair dust-collecting unit), relay harness fault
(Ventiair dust-collecting/humidifier unit)
Ventiair internal transmission error
(between total enthalpy – fan unit)
Indoor unit · external safety device error
Indoor unit · BEV unit (Sky-Air connection unit) PC board
assembly fault
Indoor unit · PC board assembly fault
Indoor unit · Drain level error (33H)
Indoor unit · Fan motor (51F) lock, overload
Indoor unit · Fan direction adjustment motor (MA) error
The display "
" flashes under
the group No. where the indoor
unit that has stopped due to mal-
function.
the malfunction code is
English
Hide quick links:
Advertisement
Table of Contents
