Bayer HealthCare Contour next EZ User Manual page 16

Using the Markers
Logbook = The Logbook marker can be used to
mark any result as being unique or different in some
way, and for which you may want to make notes in your
Logbook. Seeing a result with this symbol next to it
in the memory will help remind you that there is more
information recorded about this test result.
Please see the following pages to use these options.
If you do not want to mark the test result
Remove the used test strip to automatically save the
test result in the meter memory with no markers. This
will also turn the meter off.
®
26
If you have set up your
meter in Advanced Mode,
your meter will display three
markers after you test your
blood.
Pre-meal = Marks a
test result that was taken
before a meal.
Post-meal = Marks a
test result that was taken
after a meal.
If you want to mark the test result
Before you remove your test strip, press ▲ or ▼ to
select the marker you want to set. The marker will flash.
To mark a result with the pre-
meal marker, press M when
the
The
feature allows you to set a
reminder to remind you to
run a post-meal test.
The reminder is available
only after setting a pre-meal
marker.
If you want to set the
reminder, press M. The
will appear and stop flashing.
If you do not want to set the
reminder, press ▲ or ▼ and
the
M to set.
To mark a result with the post-meal marker, press ▲ or
▼ until the
flashes. Press M to set.
To mark a result with the logbook, press ▲ or ▼ until
the flashes. Press M to set.
Need Help? 1-800-268-7200
www.bayerdiabetes.ca
flashes.
will then flash. This
will disappear. Press
27