Troubleshooting - Better Music Builder VM-93C G2 Operating Instructions Manual

TROUBLESHOOTING

Troubleshooting
CAUTION: Before troubleshooting any symptoms, make sure equipments
are turned OFF.
1. SYMPTOM: NO SOUND COMING FROM MICROPHONE
CAUSE:
There is no indication of signal.
REMEDIES:
A. Battery may be low and should be recharged by placing the
microphone onto the CHARGER BASE.
B. Microphone and receiver should be in the same channel to allow
transmitting and receiving signal.
C. Volume is turned to a low level and should be turned to a high but
comfortable volume level.
D. Make sure no wires inside the microphone are loose. If so, reconnect
wires if possible.
E. Make sure the microphone is turned ON; not OFF.
2. SYMPTOM: RECEIVER LCD IS OFF.
CAUSE:
Receiver is unpowered.
REMEDIES:
A. AC POWER CORD should be connected properly.
B. Make sure the right AC POWER CORD is being used.
C. Determine whether there is indeed current coming from the power outlet.
3. SYMPTOM: NOISES.
CAUSE:
There is interference within your area.
REMEDIES:
A. Make sure user is not standing too close to speakers. Microphone being
too close to speakers will create feedback unless microphone volume is
turned down.
B. Audio cable of poor quality should not be used. Switching to a cable of
higher quality such as a balanced XLR cable can reduce noise.
C. Switch to a model that uses a different set of channels when the above
remedies do not work.
12