Operation; How To Select Frequencies/Channel - Better Music Builder VM-93C G2 Operating Instructions Manual

OPERATION

Operation
HOW TO SELECT FREQUENCY/CHANNEL
Setting up the best frequency channel is quick and easy. There are two
handheld microphones and each microphone is preset with 32 frequency
channels.
STEP 1: Press the VOLUME CONTROL on the receiver to go to channel
selection. Notice the blinking channel number.
MICROPHONE 2
ACTIVE POWER
VOL
18
2400.00
STEP 2: While the channel number is blinking, turn the VOLUME CONTROL
left and right on the receiver to change the channel (32 selectable frequency
channels). Then press the SET BUTTON on the receiver to confirm.
MICROPHONE 2
ACTIVE POWER
VOL
18
2456.00
STEP 3: Press and hold the SET BUTTON on the receiver for 4 seconds to
initiate the syncing process. Notice the blinking ACTIVE INDICATOR yellow
light on the receiver.
4 SECONDS
MICROPHONE 2
ACTIVE POWER
VOL
18
2456.00
SET
CH
00
MHz
SET
CH
28
MHz
SET
CH
28
MHz
VM-93C G2
VOLUME
2 Wireless Microphone System
UHF
VM-93C G2
VOLUME
2 Wireless Microphone System
UHF
VM-93C G2
VOLUME
2 Wireless Microphone System
UHF
8