HP Z220 SFF Maintenance And Service Manual page 62

Table 2-1
Workstations (continued)
Heading
50 Chapter 2 System management
Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT
Option
BIOS Power-On
Onboard Devices
Bus options
Device Options
Description
NOTE: If you turn off power to the computer using a power strip, you
cannot use the suspend/sleep feature or the Remote Management
features.
POST Delay (None (default), 5, 10, 15, 20 seconds)—Delays start of the
●
POST process. You might need a delay to:
Allow time for some hard disk drives to spin up before POST is finished.
◦
Give yourself more time to select F10 to enter the Computer Setup (F10)
◦
Utility.
Remote Wakeup Boot Source (Local Hard Drive/Remote Server). Sets the boot
●
device for the workstation when it is started using Remote Wakeup (takes
precedence over the Boot Order menu setting).
Bypass F1 Prompt on Confirmation Changes (Enabled/Disabled)—Prevents
●
display of a confirmation prompt when you make changes to the system.
Lets you disable or specify a weekday and time for BIOS power-on.
Lets you disable or set resources (IRQ, DMA, I/O Range) for onboard system
devices such as the serial port and parallel ports. Operating system parameters
generally override Onboard Devices settings.
Enable/disable these options:
PCI SERR# Generation (Enabled/Disabled)—Controls PCI SERR# generation
●
for ill-behaved PCI add-in cards (that can generate SERR# spuriously).
PCI VGA Palette Snooping (Disabled/Enabled)—Controls PCI VGA Palette
●
Snooping for compatibility purposes.
PCI Latency Timer (32/64/96/128/160/192/224/248). 128 PCI Clocks is
●
the default.
Enable/disable the following device options:
S5 Wake-on-LAN (Enabled/Disabled)
●
Printer Mode (EPP+ECP, Output Only, Bi-Directional)
●
Num Lock State at Power-On (On/Off)
●
(Enabled/Disabled)
● Integrated Video
1
IGD (Integrated Graphics Device) Memory—Displayed when Integrated Video
●
is Enabled. Sets the maximum amount of system memory that can be allocated
as graphics memory (32, 64 (default), 128, 256, 512 MB)
Internal Speaker (Enabled/Disabled)
●
NIC Option ROM Download (PXE/Disabled)
● 2
SATA RAID Option ROM
●
UEFI Option ROM Support (Enabled/Disabled)
●
Multi-Processor (Enabled/Disabled)
●
● Hyperthreading (Disabled/Enabled)
1
Download (Enabled/EFI/Disabled)
2
1