Table 2-1
Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT
Workstations (continued)
Heading
Option
Device Security
USB Security
Slot Security
Network Boot
System IDs
Master Boot Record
(MBR) Security
Description
Makes the following devices available or hidden to the computer:
Embedded Security Device (hidden by default)
●
System Audio
●
Network Controller
●
SATA ports
●
With the exception of Embedded Security Device (TPM), Device Available is the
default setting for all devices (allows the operating system to access the device).
Device Hidden disables the device by the BIOS so that the operating system can no
longer enable the device.
NOTE:
An entry for enabling DriveLock appears in the setup menu if the computer
has a DriveLock-compatible hard disk drive.
Set workstation USB ports to Enabled/Disabled:
Front USB Ports
●
Rear USB Ports
●
Internal USB Ports
●
Lets you disable any PCI or PCI Express slot.
Lets you enable/disable the ability to boot from the network using the
the boot order.
Provides these options:
Asset Tag—A user-editable, 16-byte string identifying the computer.
●
Ownership Tag—A user-editable, 80-byte string identifying ownership of the
●
computer. This tag appears on the screen during POST.
Universal Unique Identifier (UUID)—An ID number set in the factory that
●
uniquely identifies the computer.
Keyboard—Lets you set the keyboard locale for System ID entry.
●
When MBR Security is enabled, the BIOS prevents any changes being made to the
MBR of the current bootable disk while in MS-DOS or Windows Safe Mode—
(Enable or Disable).
NOTE:
Most operating systems control access to the MBR of the current bootable
disk; the BIOS cannot prevent changes that may occur while the operating system is
running.
The Computer Setup (F10) Utility
F12
key or
47