2 X 100Watt Class D Audio Amplifier Board - TK2050
2.2 Input Connections
You may use RCA connectors to input audio signal.
FIGURE 2-2 INPUT CONNECTION
TABLE 2-2 INPUT CONNECTION
Connector Mark
RCA connector
Warning:
2.3 Output Connections
This default pre-installed output connection is terminal block. If you prefer to use banana
plugs, please visit our website for the accessories package and install them manually.
AA-AB32186_Ver1.0_Page 6
1. For each group (dual channels), RCA and Terminal Blocks can not be used as
input connectors at the same time.
2. Do not plug in or unplug RCA connectors when the amplifier is powered.
Channel Description
J3
Channel 1 Input
J4
Channel 2 Input
© 2004-2012 Sure Electronics Inc.