2*100 WATT@4OHM TK2050 CLASS-D AUDIO AMPLIFIER BOARD USER’S GUIDE Chapter1.Overview 1.1 Welcome This self-made 2*100W audio amplifier board is a perfect class-D architecture integrated with Tripath TC2000 and TP2050. It supports dual channel amplification and can readily be powered by any DC power supply ranging from +10 to 36V.
2*100 WATT@4OHM TK2050 CLASS-D AUDIO AMPLIFIER BOARD USER’S GUIDE Chapter2.Hardware Detail 2.1 Power Connection To power the amplifier board, use either jack or terminal blocks. On-board diodes can prevent the consequence of wrong connection of power supply. Connector Mark Description...
Please refer to the TK2050 Data Sheet for a complete description of HMUTE. Please refer to the Board Connection Diagram for the LED locations on amplifier board.
2*100 WATT@4OHM TK2050 CLASS-D AUDIO AMPLIFIER BOARD USER’S GUIDE Chapter3.Electrical Characteristics The following table lists all typical data. For full specifications, please refer to the Tripath data sheet of TK2050 chip. Typical Supply voltage Over-current shutdown Signal/Noise Ratio 80dBA THD+N...
Need help?
Do you have a question about the TK2050 and is the answer not in the manual?
Questions and answers