2.1 Power Connection
To power the amplifier board, use either jack or terminal blocks. Pay attention to the
polarity when connecting power supply.
FIGURE 2-1 POWER CONNECTION
TABLE 2-1 POWER CONNECTION
Connector Mark
Jack
Terminal
Blocks
Note:
2.2 Input Connections
You may use RCA connectors to input audio signal.
© 2004-2009 Sure Electronics Inc.
Chapter 2. Hardware Detail
J5
J3
VCC
J4
GND
1. You are allowed to use only one way to power the amplifier board at a time.
2. The maximum supply voltage shall not exceed 36V.
2*100W @4Ω TK2050 CLASS-D
AUDIO AMPLIFIER BOARD
Description
DC 10V to 32V power supply
The positive of DC 10V to 32V power supply
The negative of DC 10V to 32V power supply
USER'S GUIDE
AA-AB32181_Ver1.0_Page 5