Page 2
2 X 100Watt Class D Audio Amplifier Board – TK2050 Note: Please read this manual carefully before you use the product. To keep the product in a best working condition and having a long service time, please operate it according to the relevant steps. The warranty lapses if the product is damaged because of incorrect use and your negligence.
2 X 100WATT CLASS D AUDIO AMPLIFIER BOARD - TK2050 USER’S GUIDE Chapter 1. Overview Overview Welcome to use this self-made 2*100W audio amplifier board which is a perfect class-D architecture integrated TC2000 and TP2050 chips to achieve the single-channel 100W power output.
2 X 100Watt Class D Audio Amplifier Board - TK2050 1.3 Features A perfect "Class D" architecture Frequency response: 20Hz to 20KHz(±3dB) Single end audio signal input Over/under voltage protection Over current protection Over temperature protection 1.4 Applications It is the ideal solution for any sound reinforcement installation or application needing an affordable compact PA system.
Page 8
2 X 100Watt Class D Audio Amplifier Board - TK2050 FIGURE 1-4 CASCADING SCHEMATIC(OPTIONAL) Note: Please observe the following steps to complete verification so as to ensure the products are intact during transit. Open the amplifier package and make sure the product is intact (No missing or damaged components and no deformation.
2 X 100WATT CLASS D AUDIO AMPLIFIER BOARD - TK2050 USER’S GUIDE Chapter 2. Hardware Detail 2.1 Power Connection This product is powered through an on board DC jack which is anode inside and cathode outside. If you prefer to power the board with terminal block, please visit our website for the accessories package and install them manually.
2 X 100Watt Class D Audio Amplifier Board - TK2050 2.5 LED Indicators This amplifier has 1 power LED indicator which is marked as “Status”. It will be illuminated in green when power-up. FIGURE 2-4 LED INDICATOR 2.6 Volume Control No potentiometer is provided for manually adjusting the volume.
AMPLIFIER BOARD - TK2050 USER’S GUIDE Chapter 3. Electrical Characteristics Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of Tripath’s TK2050 chip. TABLE 3-1 ELECTRICAL CHARACTERISTICS Parameter Condition Min.
2 X 100WATT CLASS D AUDIO AMPLIFIER BOARD - TK2050 USER’S GUIDE Chapter 5. Contact Us Sure Electronics Co., Ltd. East zone, 3F, Building 6 Jingang Technology Innovation Center No.108 Ganjiabian Rd (ZIP: 210000) Qixia District Nanjing P.R.China Tel: +86-25-68154800-860...