Setup; Ac Power; Ac Plug - Chauvet COLORado Range IP User Manual

3. Setup

AC Power

AC Plug

COLORado™ Range IP User Manual Rev. 06
The COLORado™ Range IP has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product's sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To determine the power requirements for the COLORado™ Range IP see the label affixed
to the side of the product. You can also refer to the Technical Specifications chart in the
Technical Information chapter of this manual.
The listed current rating indicates the maximum current draw during normal operation. For
more information, you may download the document Sizing the Circuit Breakers from the
CHAUVET® website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
The COLORado™ Range IP ships with an IP66 power input cord terminated with a
proprietary IP66 connector and an IP66 to Edison power cord adapter. If the power cord
adapter that came with your product has no plug or you need to change the Edison plug,
use the table below to wire the new plug.
Connection Wire (US)
AC Live Black
AC Neutral White
AC Ground Green/Yellow
Wire (Europe) IP66 Pin
Brown 1
Blue 2
Green/Yellow 3
Setup
Screw Color
Yellow or Brass
Silver
Green
-5-