Dmx Control; Static Color; Auto Programs; Edit Customs - Chauvet COLORado Range IP User Manual

DMX Control

Static Color

Auto Programs

Edit Customs

COLORado™ Range IP User Manual Rev. 06
In this mode, each unit will respond to a unique starting address from the DMX controller.
All units with the same starting address will respond in unison.
1. Select the personality as shown in DMX Personality.
2. Set the running mode:
a. Go to RUN.
b. Select DMX.
3. Set the starting address:
a. Go to ADDR.
b. Select the starting address (D001~512).
The highest possible starting address for each DMX mode are as follows:
DMX Mode DMX Address
TOUR 496
ARC1 510
ARC1+D 509
The Static Color mode enables for permanent RGBWA color mixing without a DMX
controller.
1. Go to STAT.
2. Select the desired color (RED, GREN, BLUE, WHIT, or AMBE).
3. Select the desired color value (0~255).
4. Repeat for the other colors.
5. Select STRB.
6. Select the desired frequency (0~20).
Auto programs allow for dynamic RGBWA color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01~10) or custom program (PR. 01~10).
You cannot edit any of the auto programs (AT 01~10). However, you can edit the
custom programs (PR. 01~10). See Edit Customs for details.
This setting enables the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to EDIT.
2. Select the desired auto program (PR. 01~10).
3. Select the desired scene (SC. 01~30).
4. Select the desired color or effect (RED, GREN, BLUE, WHIT, AMBE, STRB, TIME, or
FADE).
5. Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6. Repeat for the other colors or effects.
7. Return to the SC. level (step "3").
8. Repeat the settings of colors and effects for the other scenes.
DMX Mode DMX Address
ARC3 508
ARC3+D 507
ARC3+S 506
Operation
DMX Mode DMX Address
HSV 510
BLOC 504
-9-