Light Patterns; Adjusting The Telephone Display - Avaya ETR 6D User Manual

1.4 Light Patterns

Some buttons have a green light and a red light. The meaning of these lights varies depending on whether the button is
used to access an outside line or pool, is programmed with a system feature, or is programmed for Auto Dialing an
extension number (Intercom Auto Dial button).
The meanings of the various light patterns for each possible button assignment are:
Light Pattern Line Button
On Green
Red
extension.
Off Line is idle
Flash Green
(long on, long off) at your extension.
Red
the line but not at your
extension.
Alternating Alternating green and red flash
Red/Green appears at both extensions in a
joined call.
Wink Green
(long on, short off) hold or parked at your
extension.
Red
parked at another extension.
Anyone who has the line can
retrieve the call.
Green Flutter –
(short on, short off)

1.5 Adjusting the Telephone Display

The phone must be idle and the handset must be in its cradle when you adjust the display contrast.
To adjust the display brightness
1. With the extension idle, press *.
2. Use the up arrow and
PARTNER User Guide
IP Office PARTNER Version
- You are using the line.
- Line in use by another
Flash - A call is ringing
Flash - A call is ringing on
Wink - The call is on
Wink - Call is on hold or
down arrow keys to change the display brightness.
Programmable Button
Green - Feature is on.
Feature is off.
A user is entering a a four-digit
code to lock or unlock their
extension.
–
–
Caller ID Inspect, Call Log or
Absent Msg. is on.
Absent Text Message Mgt. is
active
Call Logs is active
Intercom / Auto Dial -
Intercom Button
Red - Extension is busy.
Extension is idle.
–
–
–
- Issue 1b (22 February 2010)
Page 10