Table of Contents
Advertisement
Install the Kitchen Sink - Self Rimming
1.
Before installing the sink make sure there is adequate clearance
between the taps, the backsplash, the fixture and the cabinet.
2.
Make sure that the countertop is clean and dry.
3.
Cut out the installation template.
4.
Fix the installation template to the countertop and mark around the
template with a pencil.
5.
Using a suitable power tool, carefully cut-out the opening.
6.
Seal the cut edges with a moisture resistant sealer (e.g. yacht varnish).
Installation Template
P4345020
6
P4450
1037045
Advertisement
Table of Contents
