Table of Contents
Advertisement
Plumbing Connections
Hot (H) and Cold (C) inlets must be connected to the correct inlet supplies.
Before You Begin
1.
Turn off the water supply.
2.
The
plumbing
Regulations/Bye-laws (Scotland),
particular regulations and practices, specified by the local water
company or water undertakers. The installation should be carried out
by a plumber or contractor who is registered with, or is a member
of an association such as:
Institute of Plumbing (IOP), throughout the UK.
National Association of Plumbing, Heating and Mechanical Services
Contractors (NAPH & MSC), England and Wales.
Scottish and Northern Ireland Plumbing Employers' Federation
(SNIPEF), Scotland and Northern Ireland.
3.
Before installation carefully inspect the new fixture for any signs of
damage.
SPECIFICATION
INSTALLATION
installation
must comply
Building Regulations or any
5
with
Water Supply
1037045
P4450
Advertisement
Table of Contents
