Before You Begin
By default, the Easy Connect option is enabled.
To verify that the Easy Connect service is enabled:
1. Press the MENU button on the front panel or on the remote. The Setup window opens.
2. Select NETWORK and press ENTER on the remote. The NETWORK window opens.
3. Select the EASY CONNECT tab.
4. Under SERVICE, select ON (default). Press ENTER to save your settings.
Reminder!
Creating A Yoics Account
You must create a Yoics account in order for your system to use Easy Connect.
To create an account:
1. Go to http://lorex.yoics.com and register for an account.
91
NOTE: The Quick Setup menu
must be disabled to access the
main menu. See "Enabling/
Disabling Quick Setup" on
page 9.
The RESET function is for
troubleshooting only.
The RESET function renews the Yoics
registration secret key. There is no
need to press this button.
NOTE: There is no "www" in
front of the address.
IMPORTANT: The system
must be connected to your
local network router for
Yoics to automatically
detect the system.