How Do I Enable Ddns On My System - Lorex LH400 LINK SERIES User Manual

Appendix C: Setting Up DDNS Service

How Do I Enable DDNS On My System?

Once you have registered for free DDNS service, use the information in the confirmation email to
configure DDNS settings on your system.
Figure 41.3 DDNS menu
To enable DDNS on your system:
1. Open the MAIN MENU and click NETWORK.
2. Select the DDNS tab.
3. Under USE, select LOREX.
4. Under DOMAIN NAME, enter only the first portion of your DDNS domain from the
confirmation email. For example, if your domain name is tomsmith.lorexddns.net, you only
tomsmith
need to enter
5. Under USER ID, enter your Lorex DDNS user name.
6. Under PASSWORD, enter your Lorex DDNS password.
Obtain your Lorex DDNS user name and password from the confirmation email.
NOTE:
7. Under DDNS TEST, select START. You should receive a "SUCCESS" message. If there is an
error, check your network connections; check that you have entered the correct domain
name, user ID, and password.
8. Press ENTER to save your settings. Press CANCEL/ESC to close remaining windows.
With DDNS entered on your system, you can access your DVR from a remote location by using
Lorex Client 8.0 remote software or by entering the Lorex DDNS domain name in your browser.
72
in the text field.