Before You Begin; Setting The Time And Date - Lorex Road Warrior RW2S SERIES Instruction Manual

Before You Begin

BEFORE YOU BEGIN
It is highly recommended to set the time and
date on your Road Warrior before you begin
recording.
If you do not set the time and date, the video
you record will not have the correct time and
date stamp, reducing effectiveness for court
evidence.

Setting the Time and Date

To set the time and date, you must first install
the Lorex Viewer software (included).
To install the Lorex Viewer software:
1. Insert the Lorex Viewer CD into your PC's
CD/DVD drive.
2. Locate the Lorex_V2 (3.x.x).exe file on the
CD.
3. Double-click the Lorex_V2 (3.x.x).exe
file.The installer window appears.
4. Click .
Next
5. Read and
scroll to the very bottom
software User Agreement. Select the
" box and click
I Agree"
2
of the
.
Next
6. Choose
Automatic Installation
and click
Installation
Installation Method" window appears.
7. Click Finish when program installation
completes. Lorex Viewer opens.
To adjust the Time and Date with the Lorex
Viewer open:
1. Insert the SDHC memory card into the
memory card reader and plug memory
card reader into your computer's USB port.
Use the included memory card reader
NOTE:
to ensure compatibility.
The SDHC memory card slides
NOTE:
smoothly all the way into the memory card
reader. The SDHC memory card goes in one
way only. Do not force in the card.
2. Click on the log in window prompt.The
OK
default login is:
admin
password is left blank.
3. Click (Setup). The Setup window
opens.
4. In the Systems tab, under Standard time
zone, select your time zone and daylight
savings settings.Click
window appears.
5. Locate the
SDHC memory card reader
. Click
directory Save
Make sure that you save the .JDF file
NOTE:
onto your SDHC memory card, and
your PC hard drive (ie. C:\). All Road Warrior
Settings must save onto the SDHC memory
card for settings to take effect.
6. Eject memory card and insert it into the
Road Warrior. Your Road Warrior
automatically synchronizes the date with
the satellite once powered on.
or
Manual
. The "Select
Next
. The default
.The Save As
OK
.
onto
NOT