Appendix E: Connecting Additional External Monitors - Lorex LH400 LINK SERIES User Manual

APPENDIX E: CONNECTING ADDITIONAL
Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor
Out displays the exact on-screen display of the system.
Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the
system.
NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs.
Monitor
(not included)
*8-channel model shown.
To use spot out functions:
1. With a spot monitor connected, press the
the remote control or Virtual Remote followed by the numeric
button for the channel you wish to view (full-screen).
2. Press the
SPOT OUT
default, Spot Out on the system is set to Auto Sequence).
When an alarm is triggered, Spot Out will display the triggered
channel in full-screen.
EXTERNAL MONITORS
DVR*
button twice to begin Auto Sequence (by

Appendix E: Connecting Additional External Monitors

Spot Monitor
(not included)
button on
SPOT OUT
Figure 43.0 Spot Out button
77