Thin Paper Copy; Skew Adjustment - Brother MFC-J6510DW User Manual

Chapter 7
g
If you do not want to change any
additional settings, press Black Start or
Color Start.
Note
• Watermark Copy, Book Copy,

Skew Adjustment,

Thin Paper Copy and Page Layout
are not available with Ink Save Mode.
• Ink Save Mode may make your
printouts look different from your original
document.

Thin Paper Copy

If your document is a duplex copy on thin
paper, choose Thin Paper Copy so the
print on the other side does not bleed
through.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display
Advanced Settings.
e
Press Advanced Settings.
f
Press Thin Paper Copy.
g
Press Black Start or Color Start.
Note
Fit to Page, Page Layout,
Skew Adjustment, Ink Save Mode,
Book Copy and Watermark Copy are
not available with Thin Paper Copy.
48
Skew Adjustment
If your scanned copy is skewed, your
machine can correct the data automatically.
This setting is only available when using the
scanner glass.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display
Skew Adjustment.
7
e
Press Skew Adjustment.
f
Press Auto (or Off).
g
If you do not want to change additional
settings, press Black Start or
Color Start.
Note
• 1 to 2, Poster, Ink Save Mode,
Thin Paper Copy, Book Copy,
Watermark Copy, 2sidei2side and
2sidei1side of Duplex Copy are not
available with Skew Adjustment.
• You cannot use this setting with Ledger,
A3 or paper that is smaller than
2.52 in.  3.58 in. (64 mm  91 mm).
• This setting is only available for paper that
is rectangular or square.
• You cannot use this setting with a thick
document, such as a book.
• Skew Adjustment is only available if the
document is skewed by less than 3
degrees.
(COPY).
7