Using The System While You're Away; From Home - Uniden D1788 User Manual

Screen) or from a handset. Only one handset can screen calls at a time. If
another handset tries to screen calls, it beeps and returns to standby.
To...
hear the caller leaving
a message
answer the call
mute the call screen
without answering*
* If you mute the call screen, the system continues taking the message: it just stops
playing through the speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select Answering
select Security Code. Use the number keypad to enter a two-digit security
code (01 to 99). Press
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
and immediately enter your security code.
If you enter it incorrectly 3 times, the system
hangs up and returns to standby.
3. The system announces the time, the number
of messages in memory, and a help prompt. It
beeps to let you know it's waiting for a
command.
4. When you hear beeping, enter a 2-digit
command from the chart. Each key must be
pressed within 2 seconds of each other or
the entry will be timed out.
#
If you don't press any keys for 15
seconds, the system hangs up and returns to standby.
From the base
Listen to the caller
over the speaker.
Pick up the corded
handset.
Press
PlAy/stoP
when you're finished.
Menu/select
From a handset
Press
MessAge/Mute
Press
tAlK/flAsh
Press
enD
.
handset to the cradle.
0
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
.
.
or return the
Setup, then
English - 21