Recording The Outgoing Message - Uniden D1788 User Manual

Submenu
Message Alert
Ans. Language
Call Screen
Ans. On/Off
Record Greeting
Greeting
Options

Recording the Outgoing Message

Your personal outgoing message or greeting can be from 2 to 30 seconds
long. If you don't record a greeting, the system uses the pre-recorded
greeting: Hello, no one is available to take your call. Please leave a message
after the tone.
Follow these steps from the base or the cordless
To...
handset:
1. Open the menu with the phone in standby. Select
2. Press
Record a
personal
3. Press
greeting
4. To keep the greeting, press
1. Open the menu with the phone in standby. Select
Switch
between
2. The system plays back the current greeting. Press
greetings
Delete your Switch to your personal greeting; press
greeting
IntercoM/cleAr
Purpose
Have the base beep every 15 seconds when you have a
new message. The alert stops after you listen to all your
new messages or if you press any key on the base.
Change the language of the system's voice prompts.
Turn on Call Screen feature (see page 20).
Turn your answering system on or off.
You can also press
Record an outgoing message or greeting (see below).
Switch greetings or delete your greeting (see below).
Answering Setup, then select
Menu/select
says "Record greeting" before speaking.
Menu/select
your new greeting.
on the handset. To re-record it, press
enD
last greeting recorded will be the one replayed.
Answering Setup, then
to switch greetings.
select
on the handset while the greeting is playing.
on the base.
Ans on/off
Record
to start recording. Wait until the system
to stop recording. The system plays back
PlAy/stoP
Greeting Options.
Greeting.
on the base or press
Menu/select
Menu/
on the base or
Delete
English - 19
. The