Using Call Waiting; Using The Phonebook - Uniden D1788 User Manual

Using Call Waiting

• Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
• If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received from the waiting call. Press
or
tAlK/flAsh
waiting call; each time you switch, there is a short pause before you're
connected to the other call.

Using the Phonebook

The phone can store up to 100 entries in its phonebook. All stations share
the same phonebook, so only one station can access it at a time.
To...
open/close the phonebook
scroll through the entries
jump to entries that start
with a certain letter
dial the current entry
edit the current entry
delete the current entry
make a speed dial call
Adding Phonebook Entries
1. With the phone in standby, open the phonebook.
2. Press
Menu/select
3. The screen displays Edit
4. The screen displays Edit
digits) exactly as you would dial it. Press
If you need the phone to wait before sending the next set of digits,
press
reDIAl/PAuse
pauses, but each one counts as a digit (you'll see
English - 14
on the handset to switch between the current call and the
Press...
PhonebooK
Down
uP
the number key corresponding to the letter
you want.
tAlK/flAsh
On the base, pick up the corded handset.
Menu/select
Menu/select
phone prompts you to confirm, select Yes.
Press and hold the speed dial number (0 - 9)
for 1.5 seconds. The speed dial entry displays.
Press
and select Create
Name. Enter the name and press
Number. Enter the phone number (up to 20
to insert a 2-second pause. You can insert multiple
.
to scroll through the entries from A to Z.
to scroll from Z to A.
or
sPeAKer
, then select Edit.
, then select Delete. When the
or
tAlK sPeAKer
New.
Menu/select
on the base
flAsh
on the handset.
to dial the number.
Menu/select
.
P in the display).
.