Using The System While You're Away From Home; Important Information; Solving Problems - Uniden D3098S User Manual

Using the System While You're Away from Home

You can also operate your answering system from any touch-tone phone.
Before you can use this feature, you have to program a security code.
Programming a Security Code
1. With the phone in standby, open the menu. Select
Security
select
2. Use the number keypad to enter a two-digit security code
MeNU/Ok when you're finished.
#
Remember to make a note of your new security code!
Dialing in to Your System
1. Call your telephone number and wait for the system to answer.
- If you have the
rings if you have new messages and 4 rings if you don't. You can hang up
during the third ring.
- If your answering system is off, it will answer after about 10 rings and
sound a series of beeps instead of your greeting.
2. During the greeting (or beeps), press 0 and immediately enter your security
code. (If you enter it incorrectly 3 times, the system hangs up and returns to
standby.)
3. The system announces the time, the number of messages in memory, and a
help prompt. It beeps intermittently to let you know it's waiting for a
command.
4. When you hear
beeping, enter a 2-digit
command from the
chart:
#
If you don't press any keys for 15 seconds, the phone will hang up and
return to standby.

IMPORTANT INFORMATION

Solving Problems

If you have any trouble with your phone, check this section first. If you need
help, call our Customer Care Line listed on the front cover.
General problems
No station can make or receive
calls.
24 - English
Code.
Ring Time set to
01 Repeat message
02 Play message
03 Skip message
04 Delete message
Possible solutions
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few
minutes; then reconnect it.
Answering
Toll Saver, the system answers after 2
Setup, then
(01 to 99). Press
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts