Using The System While You're Away From Home - Uniden XDECT SSE25 Series Owner's Manual

If you mute the call screen, the system continues taking the message: it

just stops playing through the speaker.
Only one handset at a time can screen calls. If another handset is

screening the call, the handset beeps and returns to standby.

Using the System While You're Away from Home

You can also operate your answering system from any touch-tone phone.
Before you can use this feature, you have to program a security code.
Programming a security code
1) With the phone in standby, open the menu from any handset.
Ans. Setup, then select Security Code.
2) Select
3) Use the number keypad to enter a two-digit security code (
Press
SElECT/mENU
remember to make a note of your new security code!
Dialing in to your system
1) Call your telephone number and wait for the system to answer. (If your
answering system is off, it will answer after about fifteen rings and
sound a series of beeps instead of your greeting.)
2) During the greeting (or beeps), press
security code. (You have 3 tries to enter you security code: if you enter
it wrong 3 times, the system hangs up and returns to standby.)
3) The system announces the current time, the number of messages
stored in memory, and a help prompt. Then it starts beeping
intermittently to let you know it's waiting for your command.
4) When you hear the intermittent beeping, enter a command from the
chart to the right.
If you don't press
any keys for 15
seconds, the phone
will hang up and
return to standby.
XDECT SSE25 OM.indd 21
when you're finished.
#-1 Repeat message
#-2 Play message
#-3 Skip message
#-4 Delete message
and immediately enter your
#
#-5 Stop playback
#-6 Turn the system on
#-9 Turn the system off
#-0 Hear help prompts
00 to 99).
21
23/12/09 11:17:57 AM