Using The System While You're Away From Home - Uniden 1035 Series Owner's Manual

To...
restart the
current message
skip a message
delete a
message
delete all of your
messages
play old
messages
stop playback
Another feature your answering system gives you is call screening.
Screening Your Calls
While the system is taking a message, you can hear the caller on the
base speaker (if you turn on Call Screen). To mute the call screen
without answering, press
system continues taking the message; it just stops playing through the
speaker.
You can also use your answering system from any touch-tone phone.

Using the System while You're Away from Home

Before you can use this feature, you must program a security code.
1. With the phone in standby, open the menu from any handset.
Programming a security code
2. Select Ans. Setup, then select Security Code.
3. Use the number keypad to enter a two-digit security code (00 to
99). Press
18
From the base
Wait at least 3 seconds
after a message starts
playing, then press
Press .
skip
While the message is
playing, press
With the phone in standby,
press
dElETE
prompted, press
again.
After the system plays all new messages,
press
play/sTOp
press
play/sTOp
play/sTOp
when you're finished.
mEnu/sElECT
REpEaT.
.
dElETE
. When
dElETE
again.
.
. If you mute the call screen, the
From a handset
(remote operation)
Wait at least 5 seconds
after a message starts
playing, then select
1:Repeat.
Select 3:Skip.
While the message is
playing, Select 4:Delete.
Not available.
Select 2:Play.
Select 5:Stop.