Introduction Congratulations on your purchase of RBH Sound outdoor speakers! Your speakers are the result of many years of research and development dedicated to producing high quality products for home audio and audio/video systems. This manual contains features, setup recommendations and specifications for the AO520 outdoor speaker.
Features The cabinet of the AO520 is constructed of impact resistant fortified ABS which is sealed to provide resistance from the natural elements of the weather. The rounded back is designed for easy placement into a corner. All hardware parts are made from brass, aluminum or stainless steel and the binding posts are plastic to avoid corrosion.
The hole in the center of the bracket allows speaker wire through so it may be properly attached to the speaker. It is best to consult your local RBH Sound dealer or installer with any further questions. AO520 Outdoor Speakers...
Mounting and Connections A. The AO520 can be mounted either horizontally or vertically. Hold the bracket against the mounting surface, so you can mark the locations of the mounting holes, and the wire hole (see the Parts Guide). B. Drill corresponding pilot holes for the included mounting screws or nails (not included), and a hole large enough for speaker wire to pass through.
Defective parts will be repaired or replaced without charge by your dealer’s store or by RBH Sound authorized locations to service RBH Sound products. Charges for unauthorized service and transportation cost are not reimbursable under this warranty.
Need help?
Do you have a question about the AO520 and is the answer not in the manual?
Questions and answers