Introduction Congratulations on your purchase of RBH Sound in-wall speakers! Your speakers are the result of many years of research and development dedicated to producing high quality products for home audio and audio/video systems. This manual is designed to give you, the installer or owner, basic information as to the speaker’s installation and operation.
Page 4
Room Setup Suggestions With nearly endless placement options, careful consideration for placement of in-wall speakers needs to be considered, as installation requires cutting a hole in your wall or ceiling! When using speakers in home theater applications follow the guidelines illustrated below.
However, using an RBH Sound back box will most likely improve the tightness and control the bass response. RBH Sound in-wall speakers have also been designed to make installation as easy as possible.
Speaker Installation (continued) NOTE: The frame will overlap the cutting edge by about a 1/4 to 5/8-inch (depending on model) which will mask any minor cutting inaccuracies. 5. Confirm the speaker easily fits into the hole, without any gaps. Connecting the Speaker: 6.
The FB-W can be mounted in-between standard 2x4 stud-frame construction and enhances the sound quality of in-wall speakers. It also diminishes the sound from being transferred into rooms on the other side of the wall. For post-construction install simply fold lengthwise, push in hole and expand inside then tack to studs.
Warranty Your RBH Sound in-ceiling speaker is covered by a limited warranty against defects in materials and workmanship for a period of 25 years. This warranty is provided by the authorized RBH Sound dealer where the speaker was purchased. Warranty repair will be performed only when your purchase receipt is presented as proof of ownership and date of purchase.