Page 1
HS-615 HANGING SPEAKER O w n e r s M a n u a l...
Page 2
To maintain speaker appearance, clean with a damp soft cloth. Features The RBH Sound HS-615 hanging speaker incorporates a poly-resin enclosure to reinforce bass frequencies allowing a more controlled bass response, and utilizes an acoustic suspension design while offering operation in either 8 Ohm or 70 Volt modes.
Page 3
0 position is the factory setting and generally provides the most natural response from the speaker. The use of a 70 Volt transformer allows several HS-615 speakers to be used together by running a speaker wire from one speaker to the next in a parallel connection when using a 70 Volt amplifier (as shown in the wiring diagram below).
Page 4
Voltage Selector As previously mentioned, the HS-615 can be used in a 70 Volt system or in an 8 Ohm system. The voltage selector switch allows you to properly set the speaker to 8 Ohm or 70 Volt operation.
Page 5
Safety Compliance CE LOGO: These products are in compliance with the EMC Directive 89/336/EEC and Article 10 (1) of the directive. In compliance with Technical Regulations EN55013-1 and EN50082-1. Specifications 8 Ohm Operation Speaker Type: 2-way Hanging Speaker (20-foot Hanging Cable Included) Frequency Response: 100Hz–20kHz ±3dB Sensitivity:...
Page 6
This warranty becomes void if the product has been damaged by alteration, misuse or neglect. RBH Sound assumes no liability for property damage or any other incidental or consequential damage whatsoever which may result from the failure of this product.
Need help?
Do you have a question about the HS-615 and is the answer not in the manual?
Questions and answers