Front Park/Turn Signal; Front Side Marker; Front Fog Lamp - Jeep Wrangler 2011 Owner's Manual

Hide thumbs Also See for Wrangler 2011:

Table of Contents

8. Pull the bulb from the housing.

9. Push connector locking tab to the unlock position.

10. Remove connector from bulb.

11. Push connector onto new bulb base, and push the

connector locking tab to the lock position.

Do not touch the new bulb with your fingers. Oil

contamination will severely shorten bulb life. If the

bulb comes in contact with any oily surface, clean the

bulb with rubbing alcohol.

12. Reinstall bulb housing. Rotate the bulb 1/4 turn

Front Park/Turn Signal

1. Remove the front grille. Turn the retainers along the

top 1/4 turn counterclockwise and remove.

MAINTAINING YOUR VEHICLE 547

2. Pull the bottom of the grille away starting at one side

and working toward the other.

3. Turn the socket assembly 1/4 turn counterclockwise

and remove from housing. Pull the bulb straight from the

socket to replace.

1. Reach under the front fender flare and locate the front

side marker socket.

2. Turn the socket assembly counterclockwise 1/3 turn

and remove it from the housing. Pull the bulb straight

from the socket to replace.

1. Reach under the vehicle to access the back of the front

2. Disconnect the wire harness connector from the front

fog lamp connector receptacle.

Table of Contents