Programming Additional Transmitters; General Information - Jeep Wrangler 2011 Owner's Manual

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
2. While the UNLOCK button is pressed, (after four
seconds) press the RKE transmitter LOCK button. Re-
lease both buttons.
3. Test the "Flash Lights With Lock" feature outside of
the vehicle by pressing the RKE transmitter LOCK button
with the ignition in the LOCK position and the key
removed.
NOTE: Pressing the RKE transmitter LOCK button
while you are in the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security
Alarm activated will cause the alarm to sound. Press the
RKE transmitter UNLOCK button to deactivate the Ve-
hicle Security Alarm.
The "Flash Lights With Lock" feature can be reactivated
by repeating this procedure.

Programming Additional Transmitters

Refer to Sentry Key "Customer Key Programming."
If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

General Information

This device complies with part 15 of FCC rules and with
RS-210 of Industry Canada. Operation is subject to the
following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be
received including interference that may cause undesired
operation.
Changes or modifications not expressly ap-
NOTE:
proved by the party responsible for compliance could
void the user's authority to operate the equipment.