Call Forward - NEC Dterm Series E User Manual

Call indicator lamp: Lamp at top corner of terminal display
flashes when a call terminates to the terminal. Lamp lights
steadily when a message has been left. This will indicate if
you have voice mail waiting.
LCD (Liquid Crystal Diode): Display provides terminal
activity information plus date, time, and Soft key operation.
LED (Light Emitting Diode): Some function keys have a
built-in LED that lights or flashes according to the activity of
that function key.
MIC (Microphone) lamp: Lamp displays the status of the
built-in microphone used for hands-free operation.
Programmable Keys
term
The following are D features available by pressing the
programmable keys. The user may program some features,
other features must be programmed by the telephone
system administrator.

CALL FORWARD

Call forwarding enables you to forward your telephone calls
to the destination of your choice. You may want to forward
your calls to another station, the Voice Messaging Center
(x18866), or a number outside of MCCCD. All MCCCD NEC
D term Series E digital terminals have been programmed with
the following Forward features:
FWD-ALL: (Forward All) This feature, when activated (or
set), forwards ALL incoming calls to the destination assigned
by the user.
FWD-BY: (Forward Busy) This feature, when activated (or
set), forwards incoming calls to the destination assigned by
the user when you are using the phone.
To place a call on exclusive hold, press the HOLD button
twice.
To retrieve a call on exclusive hold, lift the handset and
press the held line key.
RECALL
The RECALL button clears the line and returns dial tone. It
has the same effect as replacing the handset in the cradle
and then lifting it again to receive dial tone. For example, if
you dial a wrong number, you can clear the call and reclaim
dial tone by depressing RECALL once.
REDIAL
The REDIAL key allows you to call a number previously
dialed. By depressing the REDIAL key, you can scroll
through previously dialed numbers until you locate the
number you desire.
1. Depress the REDIAL key.
2. Depress the "*" key to activate dialing.
SPEAKER
The Speaker button allows you to initiate a phone call with-
out lifting the handset. (For information about a hands-free
conversation, see section entitled "MIC')
To use the SPEAKER button:
1. Depress the SPEAKER button once (receive dial
tone).
2. Dial the number (hear called station ringing and party
answer).
3. If you encounter a busy signal or no answer, depress
the SPEAKER button once to cancel the call.