2. Depress the desired SPEED DIAL key.
3. Enter the desired telephone number or feature code.
4. Depress the FEATURE key again to save the number.
To verify the speed dial set:
1. Depress the FEATURE KEY.
2. Depress the SPEED DIAL key.
3. Display indicates digits programmed.
To place a call using SPEED DIAL:
1. Depress the SPEAKER key, or lift the handset.
2. Depress the SPEED DIAL key.
Soft Feature Keys
Soft Feature keys are the triangular shaped keys at the
upper portion of the NEC D
These keys are used to activate additional features
programmed on your terminal.
CALL BACK
Call back is used when you, the caller, dial a phone on the
MCCCD network and encounter a busy signal. By using call
back, you program the system to call you back when both
phones are idle. When both your line and the called station
line are clear, your telephone will ring in a series of three
rings. When you lift the handset, the system redials the
called number. You can choose to ignore a call back if, for
example, you arebusy when your phone rings. It will stop
ringing after a few seconds.
term
Series E digital terminal.
TELEPHONE FEATURES
The Telephone User's Guide is arranged alphabetically by
terminal (phone) feature for easy reference.
Function Keys
ANSWER
The ANSWER feature allows the console operator to notify
you that you have another call waiting. You will hear two
short tones and the ANSWER indicator will light. The
ANSWER button enables you to toggle back and forth
between two calls (similar to call waiting).
To Receive a Call with the ANSWER Button:
1.
Ask the party you are speaking with to hold.
2.
Depress the ANSWER button once (first call is placed
on hold).
3.
Receive second call.
CONFERENCE CALLING
Conference enables you to turn a two-way conversation into
a three-way conference call. You can conference call with
people within or outside MCCCD. If all three stations are
within the MCCCD, any one station can hang up and the
other two stations will still be connected.
To establish a three-way conference call from an existing
two-way call:
1.
Press the TRANSFER button once (receive dial tone).
2.
Dial the number of the third party.
3.
When third party answers, press the CONF button once.
Note: The LED CONF display will light on each telephone
instrument included in a conference call.