NEC Dterm Series E User Manual page 2

VOICE
The VOICE feature enables you to make a "voice"
announcement call to another phone on the same system.
Your voice will be projected over the speaker of the station
you call. The called party may converse with you without
lifting the handset by activating the MIC key.
Note: Voice feature does NOT work network-wide.
To initiate a VOICE call (to someone at your location):
1. Depress the SPEAKER key or lift the handset.
2. Dial the desired station.
3. Depress the VOICE soft key while receiving ringback
tone. As soon as dialing is complete, the called station
will chime. Speak to the called party.
4. Called party can speak to you handsfree.
*Note: This is not a polite feature. User should be advised
that it is intrusive.
Telephone User's Guide
term
NEC D
Written by
Susan High
Training Services
Revised by
Barbara Matus
Information Technology Services
July, 1998
Maricopa County Community College District
2411 West 14th Street
Tempe, AZ 85281-6941
Copyright 1998 - Maricopa County Community College
District. Any or all parts may be duplicated for instructional
use if credit is given to MCCCD and the author and it is not
sold for profit.
®
Series E