Specifications - Uniden MC1010 Operating Manual

SPECIFICATIONS

General
Channels:
Controls:
Status Indicators:
Channel Display:
Selector Switch:
Buttons:
Connectors:
Size:
Weight:
Supply Voltage:
Standard Accessories:
Antenna Impedance:
Microphone:
Speaker:
Operating Temperature Range:
Regulations:
Transmitter
Power Output:
Power Requirement:
Modulation:
Hum and Noise Signal-to-Noise:
Audio Distortion:
Spurious Emmission:
Output Power Stabilization:
Frequency Range:
Frequency Stability:
Receiver
Frequency Range:
Sensitivity:
Circuit:
Squelch Sensitivity:
Spurious Response:
Adjacent Channel Selectivity:
Audio Output Power:
Power Requirement:
IF Frequencies:
Transmit: 54
Receive: 54
On/Off, Volume, Squelch
TX, SCAN, , HI, LO, and
MEM,on LCD Panel
LCD (Dual 7 segment)
Channel Selector switch
LITE, 16, MEM, H/L, and STEP
Antenna, remote speaker, and DC power
2 1/5"H x 6 2/5"W x 8"L
2.4 lbs
13.8V DC negative ground
Mounting bracket and hardware, DC power cord,
microphone hanger, spare fuse,remote speaker plug.
50 nominal
Rugged 1k condenser mic element with
coiled cord
1.82 inch, 8
–10°C~+55°C
Type accepted underAS/NZS 4415:1996
1 watt or 25 watt (switch selectable)
Not rated on LO;
25 watts output: 4.5A@13.8V DC
FM 5 kHz deviation Max.
42 dB@300 HZ, 3kHz (nominal)
Less than 3% with 3 kHz deviation with 1000 Hz
modulating frequency (nominal)
- 36dBm @ 25 Watts Max.
Built-in automatic level control (ALC)
156.025 to 157.425 MHz
1.58 kHz @ – 10°C to +55°C
156.300 to 162.025 MHz
0.28 V for 20 dB SINAD
Dual Conversion Super Heterodyne PLL
0.4 V Threshold
75 dB
73dB @ 25KHz
2.7watts (10% Distortion)
210mA @ 13.8V DC squelched
520mA @ 13.8V DC at maximum audio output
1st -21.4 MHz
2nd - 455 kHz
9