Polar Electro RC3 GPS User Manual page 41

1. In time mode press START and select
running.
2. At the starting point of a known lap distance, press START (minimum calibration distance is 400 meters
/ 0.3 miles). When you have run the whole lap distance, press START .
3. Then calibrate the sensor: Press and hold LIGHT to go enter
.
sensor
4. Select
Set correct lap distance
START .
Calibrated to x.xxx
Set correct distance
Alternatively, you can calibrate the stride sensor by fixing the whole distance gathered.
1. In time mode press START and select
running.
2. Press and hold LIGHT to enter the
3. Select
Set correct distance
START .
Calibrated to x.xxx
as your sport profile. Press START again and start
Running
. Fix the displayed lap distance with the distance you just ran, and press
is displayed. The sensor is now calibrated and ready for action.
as your sport profile. Press START again and start
Running
. Select
Quick menu
. Fix the displayed distance with the distance you just ran, and press
is displayed. The sensor is now calibrated and ready for action.
. Select
Quick menu
.
Calibrate stride sensor
ENGLISH
Calibrate stride
New Accessory 41