Polar Electro RC3 GPS User Manual page 14

ENGLISH
2. Pair the heart rate sensor with the training computer
(pairing is performed only once)
1.
Searching for new heart rate sensor
computer searches for the heart rate sensor signal.
2.
Heart rate sensor found
finds the signal.
If the training computer cannot find the heart rate sensor, make sure
the heart rate sensor strap has not loosened and the electrodes of the
heart rate sensor are wet.
3. Select the sport profile
1. Select the sport profile you want to use by browsing with UP/DOWN.
2. To change the sport profile settings or heart rate settings before the
training recording is started (in pre-training mode), press and hold
LIGHT to enter
BACK.
For sport profile settings, see
4. The training computer searches the GPS satellite signals / sensor signals
1. If you have activated the GPS function and/or an optional sensor* in
this sport profile, the training computer will automatically start
searching for the signals.
14 Training
is displayed when the training computer
QUICK MENU . To return to the pretraining mode, press
Sport Profile Settings
Stay in the pre-training mode until the training computer has found
the signals.
is displayed. The training
(page 29).