3.2.2
Communication with the binary signals
In the Toshiba original procedure/G3 modes, communication is performed with the binary procedure as
follows.
1) Binary procedure
-
Transmission and reception in the Toshiba original procedure/G3 modes
Mode change pos s i ble*
Informing that there is
the next page
* Mode change is possible only for the original set manually.
GD-1220/1221
DIALING/COMMUNICATION CONTROL
Transmtter
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 4
Receiver