Specifications - Toshiba GD-1220 Service Manual

1.2

Specifications

1) Main system
- Type
Desktop type transceiver
- Operation
Transmission Manual/Automatic
Reception Manual/Automatic
2) Scanner
<Scanning density>
- Horizontal direction
16 lines/mm, 8 lines/mm
[15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm]
- Vertical direction
15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm
[16 lines/mm, 8 lines/mm]
- Combination
U-Fine: 16 x 15.4 lines/mm [15.4 x 16 lines/mm]
Fine: 8 x 7.7 lines/mm [7.7 x 8 lines/mm]
Normal: 8 x 3.85 lines/mm [3.85 x 8 lines/mm]
- Effective scanning area
Standard mode
(For NAD model)
Horizontal scanning: Max. 280 mm (Ledger width)
Vertical scanning:
(For MJD, AUD, ASD, SAD, TWD, and CND models)
Horizontal scanning: Max. 297 mm (A3 width)
Vertical scanning:
Long original mode
(For NAD model)
Horizontal scanning: Max. 280 mm (Ledger width)
Vertical scanning:
(For MJD, AUD, ASD, SAD, TWD, and CND models)
Horizontal scanning: Max. 297 mm (A3 width)
Vertical scanning:
Note: Note:
The maximum vertical scanning length is 700 mm when transmission is performed satisfying all
of the following conditions. The equipment is in the long original mode. Direct transmission is
performed. The original has the same width as of A3 or ledger. The receiving facsimile machine
is capable of receiving originals with A4 only.
GD-1220/1221
SPECIFICATIONS AND OUTLINE OF SYSTEM
[ ]: at rotation transmission
Max. 432 mm (Ledger length)
Max. 420 mm (A3 length)
Max. 1000 mm
Max. 1000 mm
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
1 - 2