Min Max Avg Recording Mode; Display Hold; Backlight (Model 112 Only) - Fluke 110 User Manual

Models 110, 111 & 112
Users Manual

MIN MAX AVG Recording Mode

The MIN MAX AVG recording mode captures the minimum and
maximum input values, and calculates a running average of all
readings. When a new high or low is detected, the Meter beeps.
Put the Meter in the desired measurement function and range.
⇒ Press MIN MAX to enter MIN MAX AVG mode.
m and MAX are displayed and the highest reading
detected since entering MIN MAX AVG is displayed.
⇒ Press MIN MAX to step through the low (MIN), average
(AVG), and present readings.
⇒ To pause MIN MAX AVG recording without erasing stored
values, press HOLD. h is displayed.
⇒ To resume MIN MAX AVG recording, press HOLD again.
⇒ To exit and erase stored readings, press MIN MAX for at least
one second or turn the rotary switch.
4

Display HOLD

WWarning
To avoid electric shock, when Display HOLD is
activated, be aware that the display will not change
when you apply a different voltage.
In the Display HOLD mode, the Meter freezes the display.
⇒ Press HOLD to activate Display HOLD. (h is displayed.)
⇒ To exit and return to normal operation, press HOLD or turn the
rotary switch.

Backlight (Model 112 Only)

Press S to toggle the backlight on and off. The backlight
automatically turns off after 2 minutes.
To disable the automatic 2-minute backlight timeout, hold down
the S button while turning the Meter on.