Read Before Using The Meter: Warnings And Precautions - Fluke 110 User Manual

Models 110, 111 & 112
Users Manual
To avoid possible electric shock or personal injury, follow these guidelines:
Use the Meter only as specified in this manual or the protection provided by the Meter might be impaired.
Do not use the Meter or test leads if they appear damaged, or if the Meter is not operating properly.
Always use proper terminals, switch position, and range for measurements.
Verify the Meter's operation by measuring a known voltage. If in doubt, have the Meter serviced.
Do not apply more than the rated voltage, as marked on Meter, between terminals or between any terminal and earth ground.
Use caution with voltages above 30 V ac rms, 42 V ac peak, or 60 V dc. These voltages pose a shock hazard.
To avoid false readings that can lead to electric shock and injury, replace the battery as soon as the low battery indicator (
Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
Do not use the Meter around explosive gas or vapor.
When using test leads or probes, keep your fingers behind the finger guards.
Remove test leads from Meter before opening the battery door or Meter case.
B
AC (Alternating Current)
DC (Direct Current)
F
D AC or DC
Earth ground
J
W Important information; Refer to manual
N Battery (Low battery when shown on display)
s
Inspected and licensed by TÜV Product Ser-
vices

Read Before Using the Meter: Warnings and Precautions

W
Symbols
I
Fuse
Conforms to European Union directives
P
$ Canadian Standards Association
Double insulated
T
t
Underwriters Laboratories, Inc.
950 Z Listed
Conforms to relevant Australian standards
;
N10140
VDE (Verband Deutscher Electroniker)
#
ii
) appears.
N