Travis Industries 564 diamond-fyre Owner's Manual page 13

5 The six accent lights can be seen in the photo below. When replacing bulbs, you may wish to replace
all six simultaneously to minimize service time. Replace the halogen bulbs with the following bulb
type:
NOTE: Take care to not touch the bulb with your fingers – use foam packing or paper towel to hold the
bulb
6 After replacing the accent light bulbs, restore the fireplace to the original configuration. Make sure
the burners are correctly positioned and have not been moved (see photo above for reference).
When replacing the crushed glass you may want to use a plastic bag to direct the glass around the
perimeter of the burner cover (see photo below). The glass should cover the glass tray and be
evenly dispersed.
© Travis Industries
Maintenance
35 Watt 120 Volt T4 Halogen Bulb (G6.35 Base)
4100507
13
100-01249_000