Ford TRANSIT CUSTOM Owner's Manual page 53

Hide thumbs Also See for TRANSIT CUSTOM:
Table of Contents

Advertisement

Hill Start Assist Indicator
While driving, it illuminates
during activation of the system.
After switching on the ignition, if
it does not illuminate this indicates that
the system has been disabled. An
authorised dealer can re-enable it. During
a malfunction, the system switches off and
it will not illuminate while driving.
Ignition Warning Lamp
If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical
equipment. Have your vehicle checked by
an authorised dealer immediately.
Low Fuel Level Warning Lamp
If it illuminates, refuel as soon as
possible.
Message Centre Indicator
It will illuminate when a new
message is stored in the
information display. It will be red
or amber in colour depending on the
severity of the message and will remain on
until the cause of the message has been
rectified. See Information Messages
(page 56).
Oil Pressure Warning Lamp
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by an authorised dealer immediately.
Instrument Cluster
your vehicle as soon as it is safe to do so
and switch the engine off. Check the engine
oil level. See Engine Oil Check (page 130).
Rear Fog Lamp Indicator
Seat Belt Minder Warning Lamp
Minder (page 22).
Stability Control Indicator
not illuminate or illuminates continuously
while driving, this indicates a malfunction.
During a malfunction, the system switches
off. Have your vehicle checked by an
authorised dealer as soon as possible.
Stability Control Off
back on or when you switch the ignition
off.
Start-Stop Indicator
engine needs to restart. See Start-Stop
(page 82). See Information Messages
(page 56).
51
If it stays on after starting or
illuminates when driving, this
indicates a malfunction. Stop
It will illuminate when you switch
the rear fog lamps on.
It will illuminate and a chime will
sound to remind you to fasten
your seat belt. See Seat Belt
While driving, it flashes when the
system is operating. After you
switch the ignition on, if it does
It will illuminate when you switch
the system off. It will go out
when you switch the system
It will illuminate when the engine
has automatically stopped. It will
flash to inform you when the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents