Roadside Emergencies - Ford TRANSIT CUSTOM Owner's Manual

3. Lift up the battery positive connection
point cover. For item location, refer to
the appropriate under bonnet overview.
See Maintenance (page 128).
4. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable 1).
5. Connect the negative (-) terminal of
vehicle B to the engine block or the
engine mount of vehicle A (cable 2).
WARNINGS
Do not connect directly to the
negative (–) terminal of the flat
battery.
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
To Start the Engine
1. Run the engine of vehicle B at a
moderately high speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.

Roadside Emergencies

116
WARNING
Do not switch the headlamps on
when disconnecting the cables. The
peak voltage could blow the bulbs.
Disconnect the cables in the reverse order.